| Compare EGP-2520 |
||||
|---|---|---|---|---|
| Grinding Capacity | Swing over table | mm | Ø250 | |
| Distance between centers | mm | 200 | ||
| Max. grinding daimeter | mm | Ø230 | ||
| Center distance between spindle & slide table | mm | 130 | ||
| Max. load held between center | kg | 20 | ||
| Grinding Wheel | Diameter x Width x Bore | mm | Ø510×50×Ø152.4 | |
| Motor rated power / max. torque | Kw/Nm | 5.5/27.6 | ||
| Wheel speed | rpm | 1250 (Opt. 1650) | ||
| Spindle type | bearing spindle | |||
| Wheel head angle | deg | 0 or 20 | ||
| Workhead | Max. manual swiveling angle | deg | 90 | |
| Spindle speed (infinite variable) | rpm | 10 ~ 600 | ||
| Motor rated power / max. torque | kw | 0.75 | ||
| Center working | Fixed or Rotary | |||
| Diameter of bore | mm | Ø20 | ||
| Center taper | MT3 (Opt. MT4) | |||
| Tailstock | Tailstock quill travel | mm | 25 | |
| Cente taper | MT3 (Opt. MT4) | |||
| Micro-taper adjustment | mm | ±0.04 | ||
| X axis | Travel | mm | 200 | |
| Max. rapid feedrate | m/min | 6 | ||
| Heidenhain linear scale resolution | um | 0.05 | ||
| Min. increment | mm | 0.0001 | ||
| Servo motor rated power | Kw | 1.2(F) / 1.5(M) | ||
| Guide way | linear way | |||
| Z axis | Travel | mm | 270 | |
| Swiveling angle | deg | 0 | ||
| Max. rapid feedrate | m/min | 8 | ||
| Min. increment | mm | 0.0001 | ||
| Servo motor rated power | kw | 1.2(F) / 1.5(M) | ||
| Guide way | linear way | |||
| Motor | Hydraulic motor | Kw | 0.38 | |
| Coolant pump | Kw | 0.2 | ||
| Machine | Net weight | kg | 2500 | |
| Measurement | mm | 1200 x 2000 x 1800 | ||